Two Candle Bridge - 25 x 15 x 3cm

Our moulds are hand-made and therefore the dimensions may vary from those shown. Please measure your mould before cutting your glass.

This mould has been designed to create a Candle Bridge, but this does not need to be its only use. It has an interesting topography which could lend itself as a template to create interesting, prefabricated components such as curved stringers etc.

This mould has a repeated deep structure and as the glass shrinks on cooling it will tend to grab on the sides. These types of mould require plenty of shelf primer and extra care when removing the slumped glass. A customer who has a production using this mould tells us that he taps the glass with a wooden block before removing it.

All convex slumping’s require careful positioning of the glass plus a good control of the slumping temperature, to stop the glass from ‘grabbing’ the mould.

Bullseye code: 8922
Inner Dimensions: Length: 25 cm, Width: 14.5 cm, Height: 3 cm
Outer Dimensions: Length: 27 cm, Width: 14.9 cm, Height: 4.3 cm
Opening Dimensions: Length: 5.5 cm, Height: 1 cm

Please see Attachments tab for recommended firing cycle.