Creative Glass Network
Shop UK
Please note that all our moulds are hand-made and therefore the dimensions may vary by up to 2cm from those shown.

Product Information

Reference Number:

Ref Code:

958.373

Weight:

2.950 kg

Manufacturer:

Creative Ceramics
Price: £49.01
ex VAT
Add to wishlist

Creative Ceramics Moulds for Fusing, Slumping & Casting

This is a very special mould to make a large and deep bowl with a wide solid base. A typical serving dish for salads, deserts and other foods. Instead of cutting the glass round try a square piece or a piece with an irregular outline. A smaller circle will result in a more shallow dish, e.g. soup bowl etc.

Recommended Firing Chart

Please Read: The steep angle of the mould may result in an uneven slumping. Reposition the slumped piece and fire a second time. Use a very low slumping temperature with a long soak.

This firing recommendation has been calculated for use with Bullseye glass. Whereas the most typical casting glasses are frit and billets, you can have great results using sheet glass, stringers, rods as well as prefabricated components.

The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc.

Following this recommended firing chart will lead to a smooth piece of glass with a glossy surface. The finished piece will shrink somewhat, depending on the amount of glass used. Some coldworking on the edges with a diamond pad may be necessary. By lowering the temperature to a sinter firing (approx. 720
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.
9986
© Copyright - Creative Glass