Creative Ceramics Moulds for Fusing, Slumping & Casting
An eye catcher for presenting snacks, amuse-bouches, sauces etc. It has a simple understated shape for small art work.
Try to fuse identical squares from two contrasting colours, total thickness 4 mm. The steep angle of this mould will reveal the bottom colour on the edge. This mould could also make a good casting mould for paperweights etc.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.