The simplicity of this mould garantees an elegant and quiet piece of glass, be it art work or utilitarian. Instead of cutting the glass to match the mould shape, try an oval or a narrower piece of glass.
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.