Cart is empty.
Creative Ceramics Moulds for Fusing, Slumping & Casting
This mould was designed to make an elegant dish for starters, snacks etc. Be creative and see what else you can come up with.
The steep angle of the mould may result in an uneven slumping. Reposition the slumped piece and fire a second time.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.