Cart is empty.
Product Information
Reference Number: | ||
Ref Code: | 958.302 |
|
Weight: | 0.470 kg |
Creative Ceramics Moulds for Fusing, Slumping & Casting
All convex slumpings require careful positioning of the glass plus a good control of the slumping temperature, to stop the glass from ‘grabbing’ the mould. Due to its complex shape, we would recommend slumping glass of approx 4mm thickness with this mould.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.
7265