Creative Ceramics Moulds for Fusing, Slumping & Casting
A classical focal piece for a side board, conference table or larger dining room table. Try to cut the glass smaller than the mould outline or vary the shape by jagged or uneven border to give emphasis to the leaf shape.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.