Creative Ceramics Moulds for Fusing, Slumping & Casting
The sconce wall lamp in only one of many uses for this template mould. The gentle and even curvature offers itself for bending stringers, narrow glass strips for further use other fused pieces.
By lining up two or several of these moulds lengthwise or sideways, you create a mould suited for a large wall or lighting piece or other free formed art work. By gluing two identically bent glass pieces together and add a base, you can create deep vessels, vases or freely constructed art work.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.