Bullseye Separator 2.2kg

Bullseye Separator 2.2kg

951.233

5804

£33.06

£27.55 Excl. VAT

Hot glass will stick to most ceramic or metal surfaces and crack as it cools, unless prevented by a separator like Bullseye shelf primer. Careful application of this primer to shelves and moulds will result in smooth, effective firing surfaces.

Mix 1 part shelf primer powder to 5 parts (by volume) of water.  Apply five coats of primer, in a cross-hatched fashion.  A Chinese haik brush (product 950.207) is ideal for this purpose.  Ensure you stir the mix frequently during application to stop the powder settling.  Dry the shelf/mould in your kiln at approx. 260ᵒC (500ᵒF) for 20 minutes.  Then allow to cool to room temperature before use.

Frequency of cleaning and re-application will depend upon firing temperature.  Firing at lower temperatures will enable you to reuse the shelf/mould several times provided the primer is not scratched.  When necessary, remove old primer and re-coat as before.

Store shelf primer powder in a tightly closed container in a cool, dry place.  Primer that is mixed with water will last for several weeks, if kept covered.

Avoid breathing shelf primer dust; wear a respirator such as 980.352.

951.233

5804 2.250000

Related Products (There are 16 other products in the same category)

close Shopping Cart
close Shopping Cart