Ceraboard 100 - 10mm thick
Can be used as a replacement kiln shelf in small kilns. Can also be used for making slumping moulds, drop out moulds, or frit casting boxes. Easily cut to size with a sharp craft knife, or carved into for relief work. Has two sides: a semi-smooth side and a side that imparts a textural granite-like finish to the underside of the glass. Can be glued to itself or to other refractory materials using Hi Temp Glue 950.940.
The board is permanent when treated with Colloidal Silica Hardener, otherwise it will soften and deteriorate over time. Kiln wash required e.g: Bullseye Shelf Primer.
DANGER: Contains Refractory Ceramic Fibres (Aluminosilicate wools) Hazard pictogram GHS08 systemic health hazard.
May cause cancer by inhalation. Do not handle until safety precautions have been read and understood. Use personal protective equipment as required. Please request Material Safety Data sheet prior to order/handling.
480.077
6659 0.050000
Related Products (There are 12 other products in the same category)
