Our moulds are hand-made and therefore the dimensions may vary from those shown. Please measure your mould before cutting your glass.
Drop-out moulds are made for deeper vessels, art objects etc. Thanks to the lack of contact of the glass with the mould, the final piece has a shiny, texture free outside, reminiscent of blown glass.
By monitoring the drop out process any type of dinnerware can be made, e.g., soup and salad bowls, dessert plates etc.
Depending on the original glass thickness, the depth, and the width of the drop-out, many different final shapes are possible. By cutting off the lip – straight or in jagged line - you can create sophisticated deep bowls, vases, and another artwork.
Dropouts are a bit more tricky than other slumping’s. Visual control during the process is necessary. The most even dropouts are achieved at low temperatures over a long time in a side fired kiln, e.g., Paragon Modell GL 24.
Bullseye code: 8957
Inner Dimensions: Length: 24.2 cm, Width: 24.2 cm, Height: 1.2 cm
Outer Dimensions: Length: 24.2 cm, Width: 24.2 cm, Height: 1.7 cm
Opening Dimensions: Length: 14.5 cm, Width: 14.5 cm, Height: 1.4 cm
Please see Attachments tab for recommended firing cycle.