Related Products (There are 16 other products in the same category)
Description
Adhesive for glass with glass and glass with metal. The curing process under UV-light requires few seconds and results in a strong and invisible bond. Suited for furniture, decorative objects etc.
Properties & Polymerization
The glass (or metal) needs to be thoroughly cleaned and dried prior to proceeding with the glue. The degree of the polymerization depends on the intensity and the distance of the UV-light source, the thickness of the bond as well as the light transmission of the
materials. We recommend using a UV-Lamp with a wave length of 365 to 420 nm with a power of approx. 100mW/cm2.
The curing times can vary with the thickness of the bond.
Storing
Keep in a dry space at max. 25°C. Avoid contamination – do not put back spilled or superfluous material back into the bottle.
Safety Aspects
When the UV-Lamp is switched on, wear eye protection with UV-filter.
| Application: | For large gaps, to use for non co-planar surfaces and decorative objects |
|---|---|
|
Viscosity: |
5000 – 7500 |
| Gap Filling Capacity: | 0.03/2 mm |
| Curing Time: | 6-10 seconds |
| Colour: | Transparent |
| Light Transmission: | > 90% |
|
Resistance to humidity at 40°C: |
No indication |
900.384
10591 0.080000
Customers who bought this product also bought: