Ceramic Fibre Blanket - 1260° - 25mm - 60x50cm

Ceramic Fibre Blanket - 1260°C - 25mm

This is a fantastic product for use in all your kilnforming projects. Create bas-relief texture in your glass: just cut to shape and place under the glass before fusing; use it to support glass during slumping to create some great shapes! Use with Colloidal Silica Hardener to create a permanent shape. No fuser should be without this versatile product!

It is important to avoid contact with the skin, and wear a respirator designed to filter particles at all times when handling and working with the material. After firing clean any residual fibre from the glass under water. When disposing of waste material always put in a plastic bag, sealed at the top.

Dimensions: Approx 50 x 60 cm

Thickness: Approx 25mm

For use at temperatures up to 1260°C

Can also be provided in larger rolls.

DANGER: Contains Refractory Ceramic Fibres (Aluminosilicate wools) Hazard pictogram GHS08 systemic health hazard.
May cause cancer by inhalation. Do not handle until safety precautions have been read and understood. Use personal protective equipment as required. Please request MSDS for details of hazards and precautions.