Bullseye Rods - Amber Lustre - 4-6mm - Transparent

Bullseye Rods - Amber Lustre - Transparent - 4-6mm



Recommended for torchwork only, please see description


£4.27 Excl. VAT

"Striking glasses" change dramatically to reach target colour during firing. Colours may vary, depending on firing schedule, rate, atmosphere, and heat work.

Contains: Lead
May react with: Selenium
Cold characteristics: Clear.
Torch: A reducing glass that can develop a metallic sheen with an amber cast. Begin by working 1701 in a neutral flame. When ready to develop a metallic sheen, the glass should be relatively cool (no visible heat) and stable on the mandrel.
Create a reduction atmosphere by turning the propane (fuel) up and watch for the surface of the glass to become metallic. Once this has happened, the piece should be put into an annealing kiln. This is a finishing step. If the metallic surface is reintroduced to a neutral flame, it will dissipate. It can be brought out again by returning it to a reduction atmosphere.
When molten, this glass has a low viscosity, and can be quite soft, which may result in a blurred edge where it meets other glasses. In addition, the process of reducing the glass can cause a metallic sheen over areas of glass immediately adjacent to this style.
Kiln: Not recommended for kiln forming.
Other: 1701 is a relatively heavy glass, and there are 14 rods per pound (compared with 18-20 rods per pound for most other styles). Labelling is encouraged, because 1701 stays deceptively clear until reduced. Lustre rods are not part of the Bullseye Compatible line for kiln forming and are formulated solely for flameworking with Bullseye rods. We advise labelling all lustre glasses.



Data sheet

Bullseye Rods
Bullseye Glass Style

9510 0.020000

Related Products (There are 16 other products in the same category)

close Shopping Cart
close Shopping Cart