Bullseye Frit - Dense White - Medium - Opalescent - 450g

Bullseye frits are made from crushed, screened and magnetically cleaned Bullseye Compatible sheet glass.

Our Medium frit ranges from 1.2 to 2.7 mm, will also trap bubbles, but these will be slightly larger and fewer than those created using fine frit. Using medium frit as a base glass will create a very homogenous blend with good transmission of light.

Contains

Lead

May React With

Selenium, Sulfur

Cold Characteristics

Consistent colour.

Working Notes

This glass can be unstable when subjected to extended heatwork (pattern bars, pot melts, boiled effect, kilncasting, etc.). Firing above 1500°F (815°C) for more than 15 minutes or firing slowly between 1250°F (677°C) and 1500°F (815°C) may result in an unstable glass.

No colour shift upon firing. A dark interface reaction is possible with sulfur-bearing glasses (001137, 000137). Dense White Powder (000313-0008F) is recommended for surface use only. It may crackle when used between sheet glass layers.